The Strengths And Downsides Of The HP LaserJet 1018 Printer

by garrett on April 14, 2010

When you would like a monochrome laser as your exclusive printer in a not so big home agency, as a special printer in a large office, or to go with an ink jet so that you can print premium looking letters and even reports with good quality font, the HP LaserJet 1018 Printer, and HP Q2612A cartridge, might suit your preferences. Additionally one of its good aspects is the fact that it is more compact than various other printers. Nonetheless, in this ultra competitive area, there are additional monochrome laser printers which may do.

Features: undersized footprint, easily portable, high excellent quality text and common monochrome-laser quality meant for photos and imagery.

The 1018 is not actually the first monochrome printer you might find which is smaller sized and light weight in comparison with many ink jets, nonetheless HP affirms it is the most scaled-down laser printer, hence you would have no grounds to suspect that. It is indeed the most compact and lower scaled printer that you can expect to see, at 8.2 inch 14.6 inch 9.5 inc. (HWD), in addition to a weight of only 11 pounds. The exact footprint and paper rack is 14.6 inch 13.8 inch, even if you might save some flat surface by enabling the rack to stick out above the sides of your table.

Putting down the 1018 is straightforward and average for a special monochrome laser. Quickly mount the LaserJet 1018 laser toner, put in paper, install a USB lead, and do the programmed installation procedure, and you could be set to print.

Full velocity will not be among the list of printer’s good points, while it is not progressive enough to be seen as a big problem. The rated printer speed is merely twelve pages a minute, as opposed to twenty-two parts per million for the same priced Samsung ML-2010 not to mention twenty parts per million for the rather costlier (and network able) Lexmark E120n. With the small system acceleration, you might not be stunned to realize the fact that 1018 is the slower monochrome laser printer in its cost bracket.

On the commerce apps suite (controlled with appropriate electronics and software system), the 1018’s full duration is eleven minutes twenty eight seconds, when put next with about 8:50 for Lexmark plus Samsung printers. That is certainly enough of a impact to be noteworthy, and completely tolerable, for those who are worried about printing speed. It as well helps very much on simple data files for instance single or three page letters, the pace variance is merely a second or four. It is basically longer on data files, obviously 40 page Microsoft Word docs, and the slow engine acceleration becomes noticeable in a pragmatic sense.

Outcome quality, in any case, is entirely up to laser quality. Words quality is basically the most impressive available, which suggests the 1018 will work with any font you wish to print. Text was perfectly produced and not hard to see at four points in most fonts we tried.

Image quality is fine enough for stuff like client notifications and printing Internet pages, which might be the projects most probably to require printing images on monochrome lasers. On the whole, the 1018, and HP 1018 replacement toners, offered nearly the same compared to Samsung ML-2010 for good quality, and simultaneously were just more suitable than the Lexmark E120n. Sometimes the cheapest HP Q2612A refill is from an online laser toner cartridge vendor.

Comments on this entry are closed.

Previous post:

Next post: